UPVC Replacement Door Handles

As time passes the handles on your doors will get worn out and will require replacement. It is crucial to match the dimensions of the handles that were previously used when replacing them.

The three measurements to be inspected are the top screw's location, lever and key hole dimensions. Use the size guide to aid you.

Inline Lever/Lever

A lever handle is a modern door handle designed to work with new or replacement doors. This style of handle is available in many styles and finishes. A number of manufacturers make this handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles of uPVC/Composite are constructed of tough materials and are perfect for doors with multiple points that require a robust design. The handles are inline and run off the same spindle and screw fixings. They can be easily fitted to doors made of uPVC/Composite, either new or old.

The handle can be adjusted and angled to suit the needs of all users. The handle has been endurance-tested to 200 000 cycles. This helps ensure that the quality of finish and performance will last for a long time. The sprung lever can also be shortened to fit a wider range of locks. This is useful for doors with narrower openings where the cylinder is further back from the door. A lever that is shorter is an ideal choice for doors where the latch could be opened by a thumb turn on the inside.

Lever Pad

A Lever Pad door handle made of upvc functions differently from lever-type handles on doors. These handles can use a single spindle (inline) or independently from each side using two offset spindles or inline (pad). They are commonly used on UPVC doors with double glazing. They come in a variety of finishes and variations.

The handles have been tested to a minimum of 200 000 cycles and are available in various finishes including White and Silver, as well as Chrome & Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high level of durability and performance for the intended use.

All of the UPVC handle lever pad styles are supplied with the spindle and screws that allow them to be put on a new or existing uPVC door. The backplate fixation centres of 211mm allow for a bigger handle, which is often an advantage when replacing a damaged or old upvc window handles multi-point door lock mechanism. These handle levers have springs, which eliminate the issue of door handles that move out of horizontal position when not being used.

When selecting a replacement UPVC handle and spindle, it is essential to match the dimensions of the PZ of both the multipoint lock and the uPVC door. This measurement is also called the "handle centre" or "cylinder centres' and is a critical aspect of matching up the right handles for upvc windows.

After you have identified the proper PZ size it is important to ensure that the lever and push pads are designed to match the American with Disabilities Act compliant handles that you need for your door. These are usually round or square with an internal lever and an external push pad.

The majority of the upvc window locking handles Lever Pads that we sell are spring-loaded. This means that they will return to a horizontal position after they are not in use instead of hanging, and possibly securing to the frame. This stops draughts and cold air from getting into a house. You will also find that the majority of UPVC handle lever pad style handles are hand-operated that allows you to put them on either side of the door.

Euro Cylinder

Cylinder locks are usually used on uPVC doors, but they can also be found on other types of doors. The cylinder lock operates by using a key that unlocks the cylinder's case. This exposes pins that can be aligned with the pins in the lock, allowing them to turn the revolving camera, thereby opening the door. Euro cylinders can be fitted with up to six pins. External and internal doors require different levels of security.

Selecting the right cylinder for your needs is vitally important; this depends on how your doors and handle are used. For example, external doors must be secured with a more secure cylinder whilst internal doors can be secured with a standard cylinder. Certain cylinders are equipped with additional features that can increase security, such as anti drill or anti bump properties.

A euro cylinder should be measured correctly to ensure it's the right size for your door. The cylinder should be measured from the central fixing screw hole to the end of the cylinder and the thumb turn if you have one. It is best to do this while the lock is in place however, if this is not feasible, you can take it off and take it off to measure. A cylinder that extends beyond the handle and escutcheon could be vulnerable to attacks, such as snapping locks, so it is important that it's not too long.

The design of many modern cylinders comes with anti-drilling as well as bump resistance features. These are designed to reduce the chance of attack by forcing cylinders to turn in a new direction. This will help to prevent attacks and keep your doors safe.

Certain cylinders are constructed to resist snapping. This is a common attack on cylinders. A specially designed tool is used to break the break line of the lock, and then the front of cylinder is snapped off. This is a quicker and easier way to gain access than through a multipoint window locking handles system. It also leaves less evidence of the burglary which can delay insurance claims.

Spring Cassette

The spring cassette is situated within the base plate of the door handle. It is a spring-loaded solution to return the multipoint lock handles to their original position after use. The handles had no spring, and would slide when the locking mechanism was removed. The addition of this simple element is among the best ways to correct this and it is also an excellent way to stop your doors made of upvc from getting stuck in either closed or open position, since they aren't always easy to close manually.

These spring cassettes were created to be used with a sprung multipoint lock. They won't work with handles that aren't sprung, and you will have to cut a hole into your backplate for them to fit. (Please see the image for a more detailed diagram). They are a replacement for broken or missing cassettes in the backplate of the door handle for numerous brands of uPVC doors. They are supplied in one unit. They come with a square cut out that can accommodate an 8mm shaft.

These spring cassettes are an excellent value solution for the issue of sagging door handles. They are simple to install and can extend the lifespan of your uPVC door. Please contact our team to learn more about our selection of uPVC accessories and spares. We are always happy to offer expert advice and to assist you.